SIMALUBE AUTO OILER-BEAZZ0145 YAMAMOTO

The Yamamoto YAMBEAZZ0145 Simalube Automatic Oiler is an automatic single-point lubricator designed for compatible Yamamoto commercial laundry equipment. The Simalube system provides a consistent supply of lubricant over an extended period, helping reduce the need for frequent manual lubrication and supporting proper equipment maintenance.

The lubricator features an adjustable dispensing period from 1 to 12 months, allowing the lubricant delivery rate to be matched to the application and operating conditions. For Yamamoto laundry equipment applications, a dispensing interval of approximately 4 to 6 months is recommended.

Once the desired dispensing period is selected, the Simalube lubricator automatically supplies lubricant to the lubrication point throughout the selected interval. This helps maintain consistent lubrication in areas that may otherwise require periodic manual servicing.

The YAMBEAZZ0145 Simalube oiler is a single-use unit. Once the selected dispensing period has expired and the lubricant has been discharged, the empty lubricator should be replaced rather than refilled or reused.

Always follow the applicable Yamamoto installation and maintenance instructions and verify equipment compatibility before installation.

Yamamoto Part #YAMBEAZZ0145
Simalube Automatic Oiler / Lubricator
Adjustable Dispensing Period: 1–12 Months
Yamamoto Recommended Interval: Approximately 4–6 Months
Single-Use Automatic Lubricator

Yamamoto Oiler Installation Instructions

1.Do not remove plug from oil filled units! Cut off the protruding nipple with a knife; a small black point becomes visible (opening now guaranteed).

2.To start the Sima lube Lubricator, set the gas generator to the required dispensing time (stepless in months, 1-12) using a screwdriver or a coin. (Yamamoto recommends every 4-6months) The lubricator is activated once the dispensing time has been set. Take the required dispensing quantity from the tables under “Temperature/Output rate”

3.Note the starting date on the label using a waterproof pen.

4.Once the set dispensing time has expired, replace the empty lubricator with the same type.
5.The gas generator is sufficient to empty the unit once, irrespective of the dispensing time set. Do NOT try to re-use the canister.
6.For questions contact your nearest distributor and/or:
708-371-9595 ext. 224